Located in downtown Bellevue, this 180' x 240' three-level parking structure stores automobile inventory for Barrier Motors.

This garage utilizes the typical "all precast" structural system. The exterior frame consists of precast beam/column units, precast spandrels, and cast-in-place shear walls. Interior framing consists of precast columns, supporting prestressed inverted tee beams. The floor deck uses 24" deep prestressed double tees, with a cast-in-place composite topping.

Products

Floor Deck; 148 pcs. - 24" x 10'-0" x 58' long Double Tees

Framing;

• 7 pcs. - Beam/Column Units
• 19 pcs. - 20" x 20" Precast Columns
• 40 pcs. - 34" x 36" Prestressed Inverted Tee Beams
• 13 pcs. - Precast Spandrels

Features

Accelerated Construction Schedule- Precast components were fabricated concurrently with site and foundation work.

Efficient System- Utilizes precast components for vertical load support, and the cast-in-place topping as a diaphragm, transfering the wind/seismic loads into the cast-in-place shear walls. The cast-in-place topping also increases double tee capacity through composite action, and is finished to provide proper drainage.

Credits